Complete with a Resistive Touch LCD Screen, the Thinkware Dash Cam X700 is equipped with the Road Safety Warning System that provides audio and visual alerts for Lane Departure (LDWS), Front Collision (FCWS) and Front Vehicle Departure (FVDW). It detects road markings and gives voice warnings to the drivers if the vehicle begins to stray from its lane or when it is at risk of an imminent crash.

 

FRONT & REAR ALL FULL HD RECORDING
CMOS Image Sensors allow constant front and rearview Full 1080p HD resolution recording during both daytime and nighttime along with 142.7-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.

 

2.7” LCD TOUCHSCREEN
No Wi-Fi or Data exchange is needed to access your dash cam.
Now, with 2.7-inch resistive full touch LCD screen, you can easily access the menu to check the video and/or to change settings.
Get an instant video playback and visual/audio warnings for Road Safety Alerts

 

ROAD SAFETY WARNING SYSTEM
(Optional GPS antenna required for x700)
The THINKWARE DASH CAM X700 is equipped with the Lane Departure Warning System (LDWS), Front Collision Warning System (FCWS), Urban Front Collision Warning System(uFCWS) and Front Vehicle Departure Warning (FVDW) to ensure driver safety with a voice and visual warning.

LANE DEPARTURE WARNING SYSTEM (LDWS)
(Optional GPS antenna required for X700)
Drowsy or distracted driving greatly increases the chance of an accident on the road.
The Lane Departure Warning System will alert the driver when the vehicle goes off the lane in a speed over 50 km/h.

 

SAFETY CAMERA ALERT
(Optional GPS antenna required for X700)
One of the safety features from THINKWARE – The Safety Camera Alert function of THINKWARE DASH CAM actively alerts the driver of any photo enforcement locations on the route while still recording videos. THINKWARE Dash Cam provides an active warning for these 5 types of road safety cameras.

  • RED LIGHT WARNING SYSTEM
  • SPEED CAMERA WARNING SYSTEM
  • RED LIGHT & SPEED CAMERA WARNING SYSTEM
  • AVERAGE SPEED WARNING SYSTEM
  • MOBILE ZONE WARNING SYSTEM

 

VARIOUS AUTONOMOUS RECORDING MODES
Various Recording Modes and Automatic Switch between Modes

Continuous Recording Mode
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

Incident Recording Mode
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

Manual Recording Mode
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.

Parking Mode
Even if you are away from the car, your dash cam will keep an eye on what’s happening and store the footage into storage when an impact and/or motion is detected. Or use Time Lapse to store the footage in 2 frames per second.
(*Hardwiring installation is required to activate parking mode)

 

PC VIEWER
The intuitive and simple-to-use interface of THINKWARE DASH CAM allows you an easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos along with your route history and speed record. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.

 

 

X700 PRO DASH CAM

£129.95Price
  • 1080p Full HD
    140° Wide Angle View
    G-Sensor Incident Detection
    Speed Camera Alert
    Super Night Vision
    Time Lapse Mode
    Win/Mac Viewer
    2.7″ LCD Touch Screen